Mac os on windows 10

Unsure what is powering your system? The download can take a little time. It is a whole OS, after all. When the download completes, extract the contents to a memorable location. This is a Virtual Machine Disk Format. Open VirtualBox.

5 Steps to Install macOS Sierra in VirtualBox on Windows 10 - Saint

Select New. Type macOS. It defaults to Mac OS X. However, we need to change this. Finally, we need to assign a hard disk. In this case, we will Use an existing virtual hard disk file. Select the folder icon and browse to where you extracted the Virtual Machine Disk Format file. Open it. Select Settings , followed by System. Remove Floppy from the boot order. Ensure the Chipset is set to ICH9. Select the Processor tab.

Assign two processors. If you have an i7 with power to spare, consider adding more. Hit OK to save the changes. Now, completely close VirtualBox. We need to essentially patch VirtualBox before the macOS virtual machine will function. This requires us to enter some code in the Command Prompt. Start by closing VirtualBox. Next, use the following command to locate the Oracle VirtualBox directory:.

Now, enter the following commands, one by one. Adjust the command to match the name of your virtual machine. After the completion of the commands, and presuming you encountered no errors, close the Command Prompt. Reopen VirtualBox. Double-click the macOS virtual machine to start it. Prefer VMware over VirtualBox? We will use the Unlocker created and provided by InsanelyMac.

Browse to the location you downloaded the Unlocker to. Extract the contents of the archive. This process works best when the folders are on the same drive e. Once extracted, ensure VMware is completely closed. Then, right-click the win-install command script, and select Run as administrator. The script will open a Command Prompt and the patch-script will run.

Pay attention! Select Create a New Virtual Machine.


  • Dual-Boot macOS on a drive with Windows 10 already installed (Shared Drive) - Hackintosher.
  • You Need These to Get Started?
  • virtual dvd iso mount mac?
  • texmaker could not start the command mac!
  • How to Install MacOS On Windows 10 in VirtualBoxd.

Choose I will install the operating system later. Next, we need to choose a name for the virtual machine. On the next screen, stick with the suggested maximum hard disk size, then select Store virtual disk as a single file. Complete the virtual disk creation wizard.

Like VirtualBox, bump the virtual machine memory up to at least 4 GB. You can allocate more if you have RAM to spare. Underneath, remove the hard disk we created. Select Open , then Finish. Now, close VMware. We have to make a small edit to a single file now. Head to location you stored the macOS virtual machine. The default location is:. Browse to macOS. Of course, if you prefer an alternative text editor, use that. Scroll to the bottom of the configuration file and add the following line:.

There are a couple of things that can and probably will go wrong during the macOS virtual machine installation in VMware Player Workstation. Ensure every process associated with VMware Player is off. Transition smoothly from Mac to Windows with our advice. Read More , or use it to access some of the best apps Apple has to offer.

Here's why it's a great update for anyone who needs to run a virtual machine on their Mac. What do you use your macOS virtual machine for? Let us know your thoughts below! Explore more about: Your email address will not be published.

HACKINTOSH GUIDE - How to Install macOS Mojave on PC from Windows

Both machines only show x so do I need to I stall Nvidia web drivers perhaps? Im running a pro version of Workstation 15 I bought and have 2 VMs running great except for the low Resolution. I can use the mac but it won't let me use iMessage, apple support says its because the serial number is zero and it's probably a Hackintosh oops. Is there any way I can change the serial number to something legit so i can use iMessage etc? Thanks a lot for this brilliant tutorial.

All steps described above went through without any errors. However, I seem to be the only one having this problem. When the VM starts I get the Apple logo in the center of the screen and a progress bar beneath it moving slowly to the right. It just won't go any further. No visible errors are thrown. I am unsure how to interpret the log messages, though:. Channel 0, guest application toolbox. Could not find the file T Unable to read signature file 'C: Selected Tools ISO 'darwin. CDROM sata0: When I put in a disc, the VM tries to access it during bootup but then throws another error.

So apparently that is not the root-cause for the VM not to finish booting. Instead of only adding the line 'smc. The screen stays black even after about five minutes. Here's a list of thing I tried that did not help: Saw somewhere in the comments that if you have an AMD with 6 processors you need to assign all 6 as virtual processors, that did not help. Tried to disable Windows Hyper-V, but could not find it in the Windows control panel so I used a commandline to disable it. Disabled my McAfee virus checker. I created an Ubuntu VM to see if that would work and it works fine.

I also started on the VMWare option, but the link to the Unlocker is not valid anymore. It stays in the black screen with the white text which does say the system uptime meaning the system is up, but it does nothing else. Any help? The messages probably report a panic mode. Use VMWare instead. Hi Gavin Many thanks for this. I got it working for Intel on Virtual Box. Everything working fine exceot for one thing - the Apple maps app is completely black!

The reason I wanted to this in the first place was to use Apple maps. Hi, Sorry to bother , in my case everything went fine all the way, but upon opening virtual box and double clicking the created virtual mac, i got the following error: More details may be available in 'C: Result Code: MachineWrap Interface: Tried to use my Apple ID when it asked me to, then this message appears: Cannot create Apple ID This mac is no longer eligible to create apple id accounts Create an apple id using a different device.

I was not creating a new one, just using my existing ID. Infact, I had some issues initially and found out that they are with the command line codes I used. Is there any fix for the same? I am using the VMBox version 5. Any help would be greatly appreciated. Thanks, Mani. I've followed the instructions to the T and upon execution, a message by Virtual Box - Guru Meditation??? I got it to work finally by downloading 5.

Not sure about the rest, now my only issue is to get the screen size to a decent resolution and scale. Thank you very much! I have followed all the steps and not seemed to have any errors or issues, but when I go to run the machine I just get a quick shot of the VirtualBox logo and then it goes to black and doesn't move on. Any idea what might be causing this and how to fix it? Use VMware. Hi, mine says this: What do I do?

Try going to Settings and then System. I have carefully checked all settings as well as the command syntax and re-entered all the commands and even tried a fresh VM. The only progress I have made is this text is new:. Error allocating 0x14b6 pages at 0xe alloc type 2 Error loading kernel cache 0x9 Boot Failed.

Mac Boot Boot Failed. Navigate to Display option and then increase the video memory to MB. If all fails, then you can always resort to using VMware rather than VirtualBox. This worked for me: You can try an older version rather than Mac OS Sierra. If not it could just be that your system may not support the Mac operating system. Virtual Box 6. Also, I tried reinstalling VirtualBox, I installed the latest version, and still got the same error in the command prompt.

The problem could probably be with your Virtual Machine name. So what I suggest for now is you can ask the guys over at Stack Overflow. Was there ever a known fix for this issue! Virtualization is turned on in the bios. Check the dashes. I was cutting and pasting from a website and that screws up dashes. I had the same issue. I fixed this by installing the older version of VirtualBox 5. I originally had installed version 5. I switched to 5. Run regular command prompt. I have gotten through every step easily thanks for that by the way.

Very easy to understand However I am having issues at the very start of the cmd command. Any ideas? Also, Moving it to the C drive is not possible as it is full.. The reason I have it installed on the Hard Drive in the first place.. It mostly likely could be the location of the drive indeed. Other than that if you find that all is correct, then what I might suggest for now is asking the guys over at Stack Overflow. I know this is from a few months ago, but you have to change the drive first…. Without doing this, it is still trying to run the commands on your C: Hello, After setting it up, it shows in system information that serial number is 0.

And because of that, i cant log into some of the apple services such as Imessage and facetime. Do you have a solution of how to get a serial number on my virtual machine. Please reply. Make sure that you have followed each of the steps correctly especially the part where you exit your VirtualBox before entering in your code and also make sure that your VirtualBox is on the latest version which is VirtualBox 5. Just double check that, but if the problem still persists then what you can do is check your system. I am running on a custom computer with a 4k monitor, how do I set up the code for 4k and upgrade the amount of graphics because I have 8Gb.

Try this guide: Hi Jake I have the sierra mac os for the first time. Thanks a lot.

Boot Camp lets you run Windows 10 on your Mac. Here's how to use it

I just have a problem with the sound. Can i just copy and paste the above code with the correct Vm name into the cmd or do i need to do it line by line? It is working like a charm thank you! For all you people having problems, the command line must be the cause of it. Just make sure that they are being typed correctly, as there is no feedback on input.

I have virtual box installed on my 3rd drive; went through all the steps, and the commands on the command line just kept cycling through over and over again. Thanks for the article and thanks to those who posted their resolution on the comments! Is it possible to run the update from the App Store? And if so what is needed to make it stick? Sorry for the wasted space. I should have been more patient. After I shut down the VM the updates installed without a hitch. This works like a champ! Much appreciated! Gracias amigo. That worked well. And thank you for being so responsive in your comments, it is very helpful.

I ran through the instructions but did not shut down VirtualBox the first time through. It did not work. I tried to close and running step 4 again. I tried deleting everything and following the instructions perfectly. I tried running the command from the comments because someone mentioned that one of the characters in the article was bad. I had my Mac for a year. Now I got into unexpected debt, and have to sell it. This will be handy as a substitute for some small work I usually did on Mac. System is installed on C: Hi Jake, im over my google drive limit and had to download 5 individual rar files.

Do I open them and add them in virtualbox individually and in any order or do I need to combine them first before or after opening them then add to virtualbox.

Install Windows on your Mac with Boot Camp

Cheers Rob. Install winrar or 7zip then right click on the first rar file and extract the vmdk file and continue following the tutorial. Nice work and thanks!! Hello Jake Thank you for your great job,ive installed macOs sierra couple month ago and it work perfectly. I just uptande my iphone to ios I have a bit PC running Windows Any idea why this is or how I can fix it? Virtualization is on but I could only choose bit Snow Leopard.


  • macOS vs. Windows: Which OS Really Is the Best? | laxabiwyby.ga.
  • full screen external display mac.
  • recboot mac os x 10.6.
  • How to install Windows 10 on a Mac?

I have bit Windows 10 PC. Hi, I am stuck in the coding. After you said, you will see some geeky coding just let it sit and then you will be at Sierra instruction part. The geeky coding up sits and I am not able to get to the Sierra instruction part. Please help. If you are having issues, use the commands presented by Asad while they are still available. All the others have issues with spacing and slashes. After correcting all those issues, I was able to get passed the not enough space error seen above and plenty of other issues. Everything worked great, but my keyboard and mouse lag really bad.

Do you have any idea how to fix that. It fails everytime for me, I suspect because of the serial number being 0. VM starts but is stuck on black screen. Does not move forward. Though, nothing happens afterwards. Any help is appreciated. On Name: Executed after VB is closed. Hi Jake. I just installed following your tutorial. It is running good and I thank you very much. I have one question. I would like to change the resolution of the screen and I only have one choice X Is it possible to have more choices and how I do that? I also have problem with my microphone.

How I can fix it. Thank you for your help. Hey thanks a lot for this tutorial. A lot of other guides have tons of issues. You made it effortless! Works on Linux too. Yeah… this guide has been floating around for some time now, being posted by different authors. I have tried just about all the commands you can find floating around as possible solution.

It may be specific to 5. So it may be worth it to look up vmware and see if that plays more nicely with this vmdk. So anyways… i will stop rambling now. Try this: If anyone else tries the same. You find the VBoxManage program for the setextradata calls in this directory. I have followed all instructions. I developed a piece of software and yesterday a guy wrote me with a problem with my application on mac.

Now I can reproduce his error and debug it. Can the display resolution be increased? I am running the VM in a 4k monitor and it is taking a tiny portion of it. Would love to make it full screen or atleast fullHD. And it worked like a charm. High Sierra Thanks for the tutorial. Looks like most people having issues because its not mentioned in the tutorial to close the virtual box before entering the code in command prompt. If you can add it in the notes sections it would be great. Hi there, thank you for this guide. I followed all the steps mentioned but when I launched the VM I am greeted with black screen not CLI screen , its just black screen where it shows nothing.

I waited for more than 30 minutes and nothing happened. This code will work as long as you update to 5. It just seems like its repeating itself over and over. Do i just wait? I ended up using the vmdk version and booting from the hard drive. You can download the vmdk file macOS Sierra Thanks, Its working. But VM is starting in small window. How can I change the resolution of the Virtual Machine?

Finally when get to the end, when i try to run the VM appear the black screen with the geek code loading the system and for 2 seconds appear a black mouse and restart. Plus sound is messed up… I get random chirps instead of the expected audio stream. This is cool and it works great! Just one problem, I canot connect to the internet via ethernet connection. Btw i doing this just for fun, I have a macbook. IS there a way that I can upgrade my os from my vm?

I am running a macOS Sierra on virtualbox 5. Hi, thank you very much for this guide, everything works fine, except for the screen size, mine is full hd but the mac os looks in x is there any way around this? I suffered the same problem but manged to fix it. I dont know which was the exact problem but in the end I typed in the command by my self: I think this is a problem in this comment section. Just wanted to say thank you! I tried a ton of different guides and could not get any of them to work and ran into a bunch of problems.


  • How to Install MacOS On Windows 10 in VirtualBox!
  • How to Run macOS on Windows 10 in a Virtual Machine.
  • creare etichette vino con mac.

After trying this it boots up without issues! I also updated virtualbox and it made no difference. ConsoleWrap Interface: Thank you!